The hot-melt adhesive stick is referred to as the adhesive stick for short. It belongs to a new type of environment-friendly adhesive product. Because it has a certain viscosity, it can be well bonded with the adhesive gun. How to operate it? Here is a brief introduction:


1. First of all, the hot melt adhesive needs to be used together with the glue gun. Prepare a glue gun and insert the glue stick into the glue groove from the rear of the glue gun before opening the glue gun;


2. After the previous step is ready, start the glue gun power supply. The glue gun gradually heats up and starts to heat. Wait for 3-5 minutes to melt the glue stick and the glue in the glue gun will flow out. Press the switch to align the muzzle with the object to be bonded and evenly apply the extruded glue on the surface of the object to be bonded. Apply evenly. When the glue is naturally cooled and dried, it means that the bonding has been completed.


Of course, you can not only use the hot-melt glue gun, but also use the lighter to heat the glue stick. You can directly use the lighter to bake any end of the glue stick. After melting, apply the glue to the surface of the object you want to bond, and then press the glue to solidify.


So is the glue stick firmly bonded?

The hot melt adhesive contains resin and is added with tackifier, antioxidant, etc. It is a thermoplastic adhesive, so its viscosity is very good. Many products in our life have been applied to the hot melt adhesive for bonding. Because of its fast adhesion and high efficiency, it is still very popular.

   2023-3-2