How can Weiwang hot melt adhesive stick be bonded more firmly?

Hot melt adhesive is needed in furniture, plastics, metals, automotive interiors, electronic devices and other industries. Customers who buy overheated melt adhesive know that hot melt adhesive is an EVA plastic adhesive, which can be used to bond all kinds of articles. It can be used for anything. It is widely used. This product can be well bonded, and the adherend can be very firm, but sometimes it will change if it is not operated properly, If the adhesion is not good, what should we pay attention to in the operation? Now let's have a look.

1. During operation, the temperature should be appropriate. The temperature should not be too high or too low. When squeezing the glue gun, you can touch the plastic shell near the gun head. If you feel hot, the preheating temperature of the glue gun is OK. You can use the adhesive directly without waiting too long.

2. After the glue gun is preheated to a certain temperature, touch the wire drawing with the gun head. The reason is that the temperature is overheated, and sometimes the wire drawing is also continuous. Therefore, when using the hot melt glue, finally touch the pull-out fine wire.

3. After the hot melt adhesive is sent to the object to be glued, two materials generally need to be bonded together. Then, after the glue gun is used, it needs to be pressed, so that the hot melt adhesive can penetrate into the gap of the material well, which can produce strong adhesive force.

Select the appropriate Weiwang hot melt glue gun, which should not be too high or too low in the use temperature. Correct use can meet the requirements of adhesives of different products. Weiwang hot melt glue gun can be used at high temperature for a long time without deformation, and the joint is also durable. You are trustworthy.

2022-4-8